Malleable Iron Two Socket Cross
Malleable Iron Pipe Clamps
|
Malleable Iron Pipe Clamps
Type 119 Two Socket Cross
90° joint, often used between middle rail and uprights on level sites and often paired with type 101 or 104. The through tube (vertical) cannot be joined within the fitting.
|
|
Body Material Standard
|
Malleable Iron, meet standard ASTM A197
|
|
Screw
|
Stainless and Carbon Steel
|
|
Tensile Strength
|
>=350Mpa
|
|
Elongation
|
>=10%
|
|
Hardness
|
HB<=150
|
|
Size Available
|
AA to E (OD size 27-60 MM)
|
|
Surface Treatment
|
Hot Dipped Galvanized, Black, Zinc Plated & Powder Coated
|
|
Pipe Clamp Size
|
Nominal Bore
|
Outside Diameter
|
|
AA21
|
1/2’’
|
21.3mm
|
|
A27
|
3/4’’
|
26.9mm
|
|
B34
|
1’’
|
33.7mm
|
|
C42
|
1-1/4’’
|
42.4mm
|
|
D48
|
1-1/2’’
|
48.3mm
|
|
E60
|
2’’
|
60.3mm
|
Malleable Iron Pipe Clamps are easlily identified by a type number of each design eg. 125 followed by a size code eg. D48, the latter part of which corresponds with the approximate outside diameter of the tube to be used (48.3mm=1-1/2" nominal bore in this case)Hence a 90° elbow suitable for an 1-1/2" norminal bore tube in this example would be denoted as a 125-D48.
Malleable Iron Pipe Clamps are used for a versatile, multi-purpose system. The flexibility of the system allows complex structures to be assembled in a quick and efficient manner.
