Malleable Iron Three Way Elbow
Product Description
Malleable Iron Three Way Elbow
|
Malleable Iron Pipe Clamps Type 116 Three ways through 90° corner joint, often used on middle rail on level sites and often paired with type 128. The through tube (vertical) cannot be joined within the fitting. |
||
|
Body Material Standard |
Malleable Iron, meet standard ASTM A197 |
|
|
Screw |
Stainless and Carbon Steel |
|
|
Tensile Strength |
>=350Mpa |
|
|
Elongation |
>=10% |
|
|
Hardness |
HB<=150 |
|
|
Size Available |
AA to E (OD size 27-60 MM) |
|
|
Surface Treatment |
Hot Dipped Galvanized, Black, Zinc Plated & Powder Coated |
|
|
Pipe Clamp Size |
Nominal Bore |
Outside Diameter |
|
AA21 |
1/2’’ |
21.3mm |
|
A27 |
3/4’’ |
26.9mm |
|
B34 |
1’’ |
33.7mm |
|
C42 |
1-1/4’’ |
42.4mm |
|
D48 |
1-1/2’’ |
48.3mm |
|
E60 |
2’’ |
60.3mm |
Malleable Iron Pipe Clamps are easlily identified by a type number of each design eg. 125 followed by a size code eg. D48, the latter part of which corresponds with the approximate outside diameter of the tube to be used (48.3mm=1-1/2" nominal bore in this case)Hence a 90° elbow suitable for an 1-1/2" norminal bore tube in this example would be denoted as a 125-D48.
Payment Terms︰ T/T, Paypal, Western Union